Simple parameterised table
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A very simple parameterised table. Easily adjust dimensions in OpenSCAD.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 17
- Makes
- 0
- Views
- 73
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
Simple Table
A very simple parameterised table.
You can adjust the dimensions easily in OpenSCAD. You can print with or without a middle v-support. You can use this as the starting point for your own project.
How to Print
- PLA for indoor use, ASA or PETg for outdoor use
- Layer height 0.20
- Infill 20%, higher if you want a bit more stability
- Cubic subdivision (or cubic or gyroid) for infill pattern
- Note the object is rotated optimally for printing, when you hit Render
How to Tweak
The design is parameterised. Open the file in OpenSCAD and take a look at the top. You can change the length, width, height, and thickness. You can choose to include the v-support structure or not.
License
See LICENSE.TXT. This code is licensed under CC-BY-SA-4.0. That license allows for private use, modification, distribution, and even commercial use, so long as you provide attribution. See the license for details. Code is hosted in github.