Adjustable Spoolholder

This adjustable Spoolholder allows you to use every common spool on the market.

You can adjust the width of the spool, by sliding the brackets on the Rail.

The bearings assure a smooth filament inwind from the role.

What you need for 1 Spoolholder:

4x Bearings (8mm x 22mm x 7mm)

4x M4x25

2x M4x10

1x KMS_SpoolholderRail

8x KMS_BearingAttachment

4x KMS_Bearinginsertsin

4x KMS_Bearinginsertsout

2x KMS_Bearingmount

Assembly Instructions:

1. Slide 2 Bearingattachemnets on the bearing from both sides
   
2. Use 2 diffrent (in/out) Bearinginserts and place them on the inner ring of the bearing from both sides
   
3. Use an M4 thread cutter to cut threads into the Bearingholder (alternative: drill open the hole so the M4 srew can cut its thread)
   
4. Srew bearings onto bearingsholder and slide them onto the rail. use 2 srews to hold them in place (see picture).

Feel free to comment, like, share and remix!

Stay healthy and happy printing.

Notice:

You can use the Bearings from the mmu2s kit or as an
Example from Amazon (no Affiliate link)

Print instructions

Temperatures: for PETG
FL: 240°C/80°C
SL 250°C/ 90°C

The Bearingattachments were printed in Prusament PETG ORANGE

The Bearinginserts were printed in Prusament PETG Jetblack

The Bearingmounts were printed in Prusament PLA GalaxyBlack but i would suggest Prusament PETG Jetblack

Why not in a single color? Well I conditioned my self that all the moving parts are orange ;D

If needed you can glue the Bearingattachements together after sliding them onto the bearing but normaly you should not need any glue.