1 / 1
ENDER 3 PRO X LIMIT SWITCH FOR E3D MOTORS
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
E3D Motors have a longer shaft. I built this to keep the limit switch in the same place.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 163
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- GNU General Public License v3.0
This allows you to re-route the wiring for the x limit switch away from the longer shaft of the E3D high torque motors when used on an ENDER 3 PRO.
I remove the JST header from the x-limit switch, and directly solder wires to it. The x-limit switch screws should fit fine. I use two M3 nuts and screws to hold the limit switch in place.
I ended up having to run a drill bit down the holes. Your mileage may vary.
Entire cad file was reversed from the files provided by Creality, but no part of their design was directly copied.