1 / 5
Braided Chopstick Holder (No Supports Required)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An elegant braided design of a holder to keep your chopsticks off the table; designed for print without supports.
- Rating
- 5 / 5
- Likes
- 68
- Downloads
- 77
- Makes
- 3
- Views
- 476
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
A beautiful chopstick holder using a braided design which holds an elegant rest in the air, carefully designed so that the model can be print in place without requiring any supports.
Printing notes:
- I used a .20 mm layer height, but other layer heights should work fine as well
- Add a color change before and after the center “rest" for a nice look
- Place it on either the left or right end in the slicer for proper print orientation (see picture)
- Recommend adding a brim in the slicer (I used a 10 mm brim, just to make sure it wouldn't slide around)
- Optionally set the “vertical perimeters” setting to at least 4
- Model is 6 cm long and 2 cm high
I'm attaching the 3MF file that shows the slice settings I used if you'd like to start with that (which match the above notes), as well as the “gcode” I used to print this on my Prusa Mini.
I hope you enjoy, and look forward to seeing other's makes!