Kitchen sink remote control replacement part (Blanco)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement part for the remote control of a Blanco kitchen sink (119 293)
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 149
- Makes
- 2
- Views
- 522
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement part for the inner part of a remote control of the Blanco Elon kitchen sink. You can find this part and the corresponding parts with the item number 119 293 for about 18€ or you can just print this part. I created this part as the original one broke and I didn't want to spend 18€ for the replacement. Hope somebody can use this at some time :)
It was easy printing the part with the smaller outlet at the bottom, using supports.
Recommended print settings: Infill 15%, support on build plate, layer height: 0.20mm. I used Prusament PLA Galaxy Black - see pictures.
Update v2: As v1 broke inside when tightening the remote control after some time, I decided to fill in the gap as there is no use for it anyway.