Kitchen sink remote control replacement part (Blanco)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement part for the remote control of a Blanco kitchen sink (119 293)
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 149
- Wydruki
- 2
- Wyświetlenia
- 522
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement part for the inner part of a remote control of the Blanco Elon kitchen sink. You can find this part and the corresponding parts with the item number 119 293 for about 18€ or you can just print this part. I created this part as the original one broke and I didn't want to spend 18€ for the replacement. Hope somebody can use this at some time :)
It was easy printing the part with the smaller outlet at the bottom, using supports.
Recommended print settings: Infill 15%, support on build plate, layer height: 0.20mm. I used Prusament PLA Galaxy Black - see pictures.
Update v2: As v1 broke inside when tightening the remote control after some time, I decided to fill in the gap as there is no use for it anyway.