Safety Razor HC
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple safety razor that is 100% 3D printed. No hardware required.
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 169
- Makes
- 2
- Views
- 1,142
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
This is a simple safety razor that is 100% 3D printed. It does not require any screws or any other hardware (besides the blade itself).
It may not be the best safety razor in the world but according to people who’ve tried it, it works and it works well! I wouldn’t know, I don‘t like safety razors.
It’s important to print the slider and the head standing on their sides (they should be oriented this way already) so that the print lines go with the hairs and not against them. You’ll need supports for the head and make sure you add brims to all the pieces except the cap.
I included 2 caps, one with the letters HC (the name I gave the razor) and one without letters. The reason the cap is a separate piece from the handle is to allow you to add weight to the razor in the form of brass rods or tungsten weights. But this, of course, is completely optional. These are the ones I used: https://www.amazon.com/dp/B072L2LLCR
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: Yes
Resolution: 0.15
Infill: 20
Filament: Prusament PLA
Notes:
- Make sure the head and slider are printer on their sides (they should already be oriented this way)
- Add supports for the head
- I recommend you add a brim to all pieces except the cap.