1 / 5
Begode Master Bracket for aftermarket headlight
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple bracket for an aftermarket headlight
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 58
- Makes
- 0
- Views
- 583
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This bracket is intended to be used with the Clarkpads faring for the Master and the headlight located here: https://www.amazon.com/gp/aw/d/B07FDVJTLX?psc=1&ref=ppx_pop_mob_b_asin_title
Must be printed in TPU as the bracket will need to flex.
You can either print it twice then flip it over or mirror it.
If you have the Clarkpads faring, you will need the short bracket and you'll need to cut your headlight with a hack saw (see pictures). It only took me about 15 minutes with a cheap 6" hacksaw. If you don't have the Clarkpads faring, then either file will do.