1 / 2
Tycoon Max EVA 3 parts for the X belt system — image 1
1 / 2

Tycoon Max EVA 3 parts for the X belt system

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Customized parts to allow the EVA 3 hot end system to be used with the Tycoon Max X belt

Rating
0 / 5
Likes
5
Downloads
33
Makes
0
Views
560
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

I wanted to replace the stock hot end on the Tycoon max, lets face is it's not very good. I reworked some parts from the EVA 3 system so I can use the X belt system on the tycoon max. Extended the horn and top mounts too.

 

One thing to note on this conversion. It will require a lot of changes to the firmware so unless you're happy to compile Marlin I would recommend Klipper, but then Klipper will not work with the clone BL touch on the tycoon so it would need on original to work. You can run Klipper on the board in the max.

This is the firmware that worked for me

https://github.com/makerbase-mks/Klipper-for-MKS-Boards/tree/main/MKS%20Robin%20Nano%20V2.x

 

I had to change the bl touch position, the min and max X values and the max Z as well as the setup for the Orbiter Extruder and new hot end.

 

 

Tags