Compact 90 straight and cross for 15x15/OpenBeam/Makerbeam XL
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a compact 90 degree brace for Openbeam/Makerbeam XL 15x15 extrusion.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 76
- Makes
- 0
- Views
- 461
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a compact 90 degree brace for Openbeam/Makerbeam XL 15x15 extrusion. There are two versions - one is a straight 90, the other is a very handy 90 degree rotated variant so you can do crossovers. The crossover version is pictured in the as-built photo.
A couple of things make this design different than the numerous other corner braces out there. This one has channel grooves to keep the part stable, which makes for a really nice, sturdy brace. I also did countersunk holes to make for a nice clean installation.
You do need to print this with supports but cleanup isn't bad.
Print Settings
Printer Brand:
LulzBot
Printer:
Mini
Rafts:
No
Supports:
Yes
Resolution:
Any. I did 0.3mm
Infill:
20%
Notes:
Supports are required. Rotate the part so it sits flat.
Category: DIY