Counting matching models…
I couldn't find any 3D files for plates fitting the 10mm extrusion MakerBeam brands as their 'Regular' series, so I modeled them up. All plates are 1.5mm thick and the through holes are 3mm ID per the spec. Included is the flat plate, the…
Made in Inventor. Based off online dimensions.
So I was ordering some Makerbeam 10x10mm frame but they had no right angle brackets in stock at the time of ordering and I couldn't wait for them to come back in stock so I decided to just 3D Print some. These will fit 10x10mm Makerbeam.…
Modeled from the MakerbeamXL specifications, without threads. I wouldn't make anything rigid from it, but it is good for modeling other parts to. If you have a file format you want, ask, I can likely export it. (built in OnShape.)
Ideally print with 0.25mm nozzle, low layer height.
This is a compact (150x200x28mm) jig for using PCB stencils to apply solder paste, or transparency sheets for applying a soldermask. It is not a full 4-axis machine created for high-volume production, but will handle skew, twist, and…
Needed a few different options for mounting 3mm panels on my BoxZero build. Both slide in and screw in options depending on how stiff a hold you need for the mount. Holes are sized for M3 screws - was designed to go with No Drop Nut for…
This is a bracket to hold a push button for MakerBeam construction. This way an ordinary push button can be used as an end stop. Category: DIY
This an alternative to the typical makerbeam nut receiver as designed in the Voron No-Drop Nut design but completely redesigned for a tool-free attachment mechanism. The receiver uses two spring arms to retain a ball-shaped bolt tip that…
This is a 45 degree makerbeam end cap i needed them for a quadcopter prototype (still working on it). These beams are 10mm x 10mm great for building stuff Instructions Print them Press fit them Category: Other
So this a derivative but i did not use any of the original parts they did not fit into my printer ;-) So i used makerbeams (mini 10x10x150 mm) some custom bearing holders and bearings works great!! Instructions Look at te stack order (see…
Apple tv remote holder with MakerBeam added on the back.
Wire clip to organize cables in 1515 extrusion (makerbeam XL model). This extrusion type is used in Voron V0.2. Print with 6 walls !
https://www.thingiverse.com/thing:6349320
Needed a few different options for mounting 3mm panels on my BoxZero build. Both slide in and screw in options depending on how stiff a hold you need for the mount. Holes are sized for M3 screws - was designed to go with No Drop Nut for…
I Modified Oleynicks flat snap in nut slightly to have a small bump inside to help thickness and how tight it is. Print Settings: 0.08 Layer Height 6 walls 0.4 line width
I wanted some more stability in the printer. So I got MakerBeamXL 1515 triangular corners. These need special z covers. So here is the edited version for a Micron+ R1 180.
There's a lot of frame braces for the Voron 0, but none of them use sections of Makerbeam XL. I had short 50mm sections begging for use, so I designed this adapter to do exactly that. When used in the front, the brace will run into the…
You need two pieces, mounted at a distance equal to the saw blade thickness. Recommend printing in PETG. During intense cutting there will be a beat of heat generated from friction and PETG will handle it better than PLA. Materials…
I added a version for a cover to clip in: → ledclip_with_coverclip_… and some Covers: → ledclip_cover_… → Spraypaint them Black while protecting the diffusor with tape they are all 60mm in height i will add some lengths and cover models…
Just a profile of MakerBeam XLs used in voron v0 build. Not intended for use in a voron build.
Porsche 911 with Makerbeam on the bottom to use with the Makerbeam set.
I made a makerbeam 300mm 15x15 printable model because i didnt want to buy the makerbeams for making my own beamcase. After printing just remove the designed supports PRINT IN .22 LAYER HIGHT!! Print as showed in the screenshot I made…
Apple tv remote holder with MakerBeam added on the back.
Cheap Ahh projector remote holder with MakerBeam on the back
This is a set of fixtures to cut and tap Makerbeam XL 15x15 in my lathe (Paulimot PM2700 / 28 mm spindle / 125 mm chuck). I used this to rework the extrusion from my "old" Kossel XL for a Voron Zero build. Using the lathe ends up in well…
Wire clip to organize cables in 1515 extrusion (makerbeam XL model). This extrusion type is used in Voron V0.2. Print with 6 walls !
After making some plates , I still missed some kinds of brackets in my Makerbeam® set. Included is a FreeCAD file with customizable beam size, hole size, fillet. STLs generated with: target: 1010 aluminum extrusion, M3 screw holes unit…
I missed some more types of brackets in my Makerbeam® set, so decided to make some more. These are the flat (plates), to keep them separate from the actual 3D brackets . Included is a FreeCAD file with customizable beam size, hole size,…
MakerBeamXL Corner Cube Feet – Custom Designed for Stable, Scratch‑Free Builds I designed these custom feet specifically for MakerBeamXL corner cubes to give your frames a cleaner look, better stability, and improved surface protection.…
Print Settings: Layer Height : 0.1 mm (or 0.2 mm but Precise Z height : On ) First layer height : 0.1 m
If you need a precise jig to cut your 1515 MakerBeam this is it! THIS MODEL ASSUMES YOU HAVE A 500mm LENGTH OF 1515 EXTRUSION! Cut to the specified length for use with this model for the ORIGINAL SV08 printer PRINT PLA 0.2-0.3 layers, 3-4…
This is simple footwear for makerbeam well euh beams It is in openscad so u can change the parameters. There are simple version en versions that are a bit overdesign but both work fine. O there also a experimental corner piece it is a bit…
No real changes but i modified the dxf file so it can be used in openscad. I use these in combination with the real thing in europe i get them from http://www.makerbeam.eu/ neat stuff. Instructions Open the openscad file and extrude ;-)…
Bracket to mount a standard NEMA 17 stepper motor to MakerBeam beams. Equivalent to MakerBeam product 100225. Category: DIY
M2 T-Nuts are great for attaching components to Voron 0 3D printers, to 1515 aluminium extrusion or even attach the Voron 0 case using the T-Nuts. You can use these 'post build' when you can't slide any M3 nuts into the extrusion slots…
This part sits on top of a cube of makerbeam to support a pane of glass. Print 4 to make a complete set. Print with chamfered side down for no supports. I used this glass: https://www.amazon.com/gp/product/B008BLT47U Print Settings…
This is a compact 90 degree brace for Openbeam/Makerbeam XL 15x15 extrusion. There are two versions - one is a straight 90, the other is a very handy 90 degree rotated variant so you can do crossovers. The crossover version is pictured in…
This is a 50mm round foot for OpenBeam/MakerBeam XL 15x15mm beam kits. Press-fit and fairly tight tolerances so tweak your printer setup accordingly.
Print it flat, don't rotate model, othervise it will crack when screw is inserted. No supports needed. It might be prone to sliding, but its not comming out. I used mine to secure Nevermore filter in place in my Voron 0.2. Works like…
Make assembly of MakerBeam XL a little easier by pre-loading your brackets with bolts and nuts. Print instructions Print with whatever you have on hand. I used PETG only because that's what I happened to have loaded into my printer. To…
Printed MakerBeamXL 1515 extrusion and Clips to join them together. "Why not use TinnT's or ryandam's solutions? They seem much sturdier and easier to print than this" Because I plan to use future 0.2 tophat mods, such as chirpy's Tophat…
If you are as dumb as I and you dont use "No-Drop nuts" mod when you built your v0, and you hate those nuts that always are not in place where you need them - this will resolve your issue. You print 2, and insert them before/after nut and…
Trying to make a vert GPU mount for 1010 makerbeam, still a work in progress and any ideas to make it better are welcomed. 18 June 23 Made some changes to the mount making the mount stronger.
Makerbeam XL Corner Cubes (1515 extrusion) I designed for a project I'm working on. I figured somebody else may find these useful.
This is a model of the part and full assembly of a 300mm Makerbeam linear guideway. It is not designed for printing, but rather to aid in designing your own printer.
This was created by jakoob of the Voron discord and uploaded with permission.
Zruncho's No-Drop Nut mod is very popular but only works for conventional 1515 extrusions, these have been redesigned for makerbeam XL extrusions. There are 12 and 15 mm (15 mm is best for most uses) single nut versions as well as a…
https://www.thingiverse.com/thing:6349320
Little cable clip to route wires along the makerbeamXL extrusions on printers such as the voron v0. Works as supplied even if it may seem that it's a bit small, just be a bit more confident forcing it into the extrusion. STEP included in…
Remix of the bottom_mount_clip that clips into the MakerBeamXL extrusions (such as used by Siboor kits) much easier. I found that the original one from Maple Leaf Makers needed a lot of post processing to get to clip into the MakerBeamXL…
Eine Abdeckung für die Stirnseite von 15x15 Makerbeams.
I wanted to create an easy to use and set up launch pad for my model rockets using MakerBeam as a small launch rail for my low to mid power rockets. It was important for me to design the launch pad so that it is quick and easy to change…
Mitre Box 15.6mm Makerbeam XL. Scaled down remix so I could cut the beams. About 1mm of play using the settings of the original model. The channels for cutting do come up tight, I had to widen them as I cut so could probably do with…
I wanted a latching clip for my rear cover on my Voron0.2. So I designed one that does not interfere with the edge of the panel as the screws in the other snap clip do. There are no fasteners in the back side of the frame. Use pieces of…
Version 1.0.0 - Release This 3D-printed mounting system is designed to securely hold control boards on the back panel of the Voron V0, V0.1, and V0.2, specifically for builds using MakerbeamXL 1515 aluminum extrusions. The robust design…
