2020 extrusion mounting plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a wall or bench mounting plate for 20x20 v-slot aluminum extrusion.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 128
- Makes
- 0
- Views
- 693
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a wall or bench mounting plate for 20x20 v-slot aluminum extrusion. Has a v-shaped wedge to help with centering/stability. To fasten to your extrusion use M3 screws and the usual hardware. I recently discovered these nifty roll-in T-nut pieces which you can insert into the channel without sliding in from the end. The screw hole is recessed so the head won't scratch the wall/bench. When used with the T-nuts above an M3x8mm cap screw fits perfectly.
The other holes are also recessed but are a bit larger (around M5) so you can use standard wall fasteners.
Prints easily with minimal support (two tiny supports underneath the recessed screw holes).