Barndoors for PAR16 Spotlight - rotatable
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I designed these for my PAR16 Spotlights. They work great!
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 98
- Makes
- 0
- Views
- 604
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
I designed this barndoor system for my PAR16 Spotlights. They work great at controlling the light and can be rotated as needed due to the round fixture.
Your lights might differ, so check the fixing mechanism and scaling to get a good fit.
The design should be good to scale up for other PAR Spotlight sizes.
If you don't use LED Lamps, use a heat resistant filament! And even with high voltage LEDs you should check the heat buildup at the front of the light.
The tightness of the pin connectors depends a lot on the print settings and quality. But you can always adjust them with sandpaper or a small piece of tape.
If you like what I make, a small tip is always very appreciated.