Lana Bedside lamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a copy of the Lana from Netflix's series "Too hot to handle".
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 120
- Makes
- 1
- Views
- 1,119
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
This is a copy of the Lana from Netflix's series "Too hot to handle". The design was made from photos of the real Lana, so the dimensions may differ from original.
The assembly consists of 3 parts:
1)Bottom part
2)Transparent part
3)Top part
Print instructions
Printing
a)Top and Bottom parts:
-FDM (Prusa MK3s)
- white PLA filament
-0.6mm nozzle
-0.4mm layer height
-2 perimeters
-15% infill
Print both parts with the closed side laying on the bed
b) Transparent part
-SLA (Wanhao D8)
-Clear UV resin
-0.05mm layer height
If you want to try printing this part on FDM printer with transparent filament probably it will do the job.
Lights
For our Lana we used IKEA OMLOPP led light and we placed it in place with a drop of hot glue. Note that there is a hole on the bottom for the wire. (Tip: If you want to colour your Lana just use a coloured piece of paper over OMLOPP. See the pictures for our red version) In general any type of circular LED that fits the bottom part is good for light source.
Assembly
There are not any special instructions. just place the 3 parts in order. If you want to keep it in place you may use a couple of drops between each part.
Enjoy!