Mini Deej Audio Controller Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Snap fit case for deej audio controller.
Designed to fit three slide pots with 45mm of travel and an arduino nano.
See the deej github for the software and build instructions:
github.com/omriharel/deej
PARTS LIST
- 1X Elegoo arduino nano clone
- 3X 45mm travel slide pots with dimensions that match Bourns PTA4543-2010CPB103
- 6X M2x6mm Screws
- Some wire and solder for making connections
Print instructions
Category: Electronics Summary
Snap fit case for deej audio controller.
Designed to fit three slide pots with 45mm of travel and an arduino nano.
See the deej github for the software and build instructions:
github.com/omriharel/deej
PARTS LIST
- 1X Elegoo arduino nano clone
- 3X 45mm travel slide pots with dimensions that match Bourns PTA4543-2010CPB103
- 6X M2x6mm Screws
- Some wire and solder for making connections
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0.2
Infill: 20%
Filament: Generic PLA Black
Notes:
The base and the knobs can be printed with 0.2mm layer height.
For the lid I used variable layer height to reduce the layer size to 0.1mm for the snap fit tabs. Seems to help a little with resolution on the tiny tabs.
Post-Printing
Parts List
- 1X Elegoo arduino nano clone
- 3X 45mm travel slide pots with dimensions that match Bourns PTA4543-2010CPB103
- 6X M2x6mm Screws
- Some wire and solder for making connections