Search results: deej

Counting matching models…

Printables

Deej enclosure for usb c arduino nano clone

Adjusted the mounting points and opening for the USB port to accommodate a generic Arduino Nano clone with USB C

Printables

My Deej Audio Mixer

This is more of an upload for myself to make sure I never lose the models, and to document my project. this project is manually wired together and fastened with m4x18 screws nuts and washers (I think? it's been a bit since I assembled…

Order a print of this model

Printables

Simple Deej case

Single piece Deej case made to fit 4x 60mm slide pots and show off the wiring. I accidentally bought 60mm pots when most models use 75mm. I also wanted to use an rp2040 board for usbc but it only has 4 analogue pins.

Order a print of this model

Printables

DIY Macro Pad with Deej Volume Sliders

After really enjoying my first DIY macro keypad , I set out to create a second iteration of my own unique design that incorporated even more features. Mainly, I wanted to combine custom macro functionality with slide potentiometers for…

Order a print of this model

Printables

deej mixer pad

Github: https://github.com/omriharel/deej/ My head stole this design from somewhere, i think teenage engineering or something. I just wanted something clean and this is what i got. Parts required: 6x M3 threaded inserts 5x M3x5…

Order a print of this model

Printables

Deej Volume Mixer Enclosure - Three Knobs

A small enclosure for a Deej unit. Holds three rotary potentiometers and an bracket for an Arduino nano. The bottom panel is held on with three M3x6mm philips head screws

Order a print of this model

Printables

Temp's Deej Case

Hers my Deej volume mixer case! components used are; 1x Arduino Nano 5x B103 10K ohm slider potentiometers 10 M2*4 screws 8 M2*8 screws You can flip the face plate to get a smoother finish on the top, Base plate should be printed flat…

Order a print of this model

Printables

Deej - hardware volume mixer for PC

This hardware volume mixer features 4 dials and 1 slider. It costs about 25€ to build. What you need: 1x linear sliding potentiometer 10k Ohm 75mm 4x linear potentiometer 10k Ohm 6x M2.5 x 5mm machine screw 6x M2.5 heat-set inserts 1x…

Order a print of this model

Printables

Arduino Enclosure for Deej and others

Use M3 threaded inserts Category: Electronics

Order a print of this model

Printables

Deej supported base

The pillars are meant to be printable with out aditional suporrts. Also, I would recommend glueing some scrap metal in to base und some rubber or foam in order to keep the deej from sliding around.

Order a print of this model

Printables

Flat 2 color lid for Deej Desk Box

Check photos on how it looks. I have used 0.4 nozzle, it would look better with 0.2

Order a print of this model

Printables

Deej

This is my take on a deej case. If you don't know about the project check it out on GitHub here you can also find the wiring diagram. Part you will need: Slider potentiometer 75mm (5pcs) Arduino Nano Usb-C (1pcs) M3*8mm (4pcs) M3 heated…

Order a print of this model

Printables

Volume Control Box (Deej)

I used it with an esp32 The code running on esp32 is available on Github . Knob.stl and LargeKnob.stl are a remix of this . Hardware required : Potentiometer 10k (x3) Red LED (x1) 220 ohm resistor (x1) Push button (x3) ESP32 or Arduino…

Order a print of this model

Printables

Deej Audio Mixer Slider Housing

This is a slider housing I made for the Deej open source volume slider project (https://github.com/omriharel/deej). Glue the potentiometer into the top plate and connect the wires. Then screw the plates together with 15mm M4 screws (other…

Order a print of this model

Printables

Sliding / Fader Potentiometer Enclosure / Deej 8 Slider Version

5 Slider Version: https://www.thingiverse.com/thing:4196719 Someone asked me to make one with 8 sliders so here you have it This enclosure holds 8 slide potentiometers and one arduino nano. In my case i use this to controll the volume of…

Order a print of this model

Printables

Sliding / Fader Potentiometer Enclosure / Deej (windows mixer controller)

Its not perfect but it works ;) 8 Slider Version here: https://www.thingiverse.com/thing:4514085 UPDATE: I added Fader Knobs that look better than the stock ones This enclosure holds 5 slide potentiometers and one arduino nano. In my case…

Order a print of this model

Printables

Deej enclosure for usb c arduino nano clone

Adjusted the mounting points and opening for the USB port to accommodate a generic Arduino Nano clone with USB C

Order a print of this model

Printables

My Deej Audio Mixer

Order a print of this model

Printables

Deej32 enclosure

This simple enclosure is designed to house the components for my ESP32 Deej Controller project. It includes space for: 2 Rotary Encoders (HW-040 or similar). 1 SH1106 1.3-inch OLED Display . 1 ESP32 C3 Supermini . Features: Compact design…

Order a print of this model

Printables

Deej 6 Slider

Deej enclosures inspired by LTT design , Arduino fits under the sliders Hardware required: 6 sliders Arduino Micro 20 screws 3x10mm 4 screws 3x25mm 24 nuts (optional, the screws can screw against the plastic) Jumper cables After assembly,…

Order a print of this model

Printables

Deej - Arduino Volume Mixer

Deej - Mezclador de volumen Arduino. 4 potenciómetros, 2 interruptores y 3 leds. Todos ellos programables.

Order a print of this model

Printables

Deejo Pocket Knife handle

Replacement handle for Deejo 37g (Standard) pocket knife. I've had success with just adding supports for the bolt holes. https://www.deejo.com/en/pocket-knives/?filtres[Taille][37-gr-standard]=1

Order a print of this model

Printables

Deej Volume mixer

Simple desktop volume mixer using deej. Requered components: Arduino Pro micro or arduino nano, I used this one ( https://www.aliexpress.com/item/1005006322199481.html? ) Faders/slider potentiometers (…

Order a print of this model

Printables

Deej (Arduino Uno)

The following description is copied from the original model with slight modifications. For more information about deej, check it out on GitHub . Here you can also find the wiring diagram. Part you will need: Slider potentiometer 75mm…

Order a print of this model

Printables

Deej Mixer with Four Knobs

Peripheral mixer to run with Deej, a client that interfaces with a microcontroller so you can control the audio levels of different apps without switching between them. Pretty neat. This case is my design for the project. Github for Deej:…

Order a print of this model

Printables

Deej

I've made few adjustments to original model. Moved hole for better alignment with Arduino Nano USB-C port. Modified hole for M3 insert to fit my M3 heat insert 5mm (diameter) x 4mm (length). Removed some material (0,2 mm) in “corners”…

Order a print of this model

Printables

Simple deej Case

This is hardware volume mixer for windows and linux that lets you control the volume of specific applications. It follows the deej project located at https://github.com/omriharel/deej This is created, in part, to support a class covering…

Order a print of this model

Printables

Deej Mixer

This is a model for a volume mixer for pc based on the deej project on github by omriharel ( https://github.com/omriharel/deej ). This model is made to work with an arduino pro micro and 5 sliding potentiometers. The hinge is made with…

Order a print of this model

Printables

Deej Under Desk Case

Mount a deej under your desk. Here's the BOM: 5x potentiometers, https://www.amazon.com/dp/B07QT1BTLJ?ref=ppx_yo2ov_dt_b_fed_asin_title 5x Latching On/Off Switches,…

Order a print of this model

Printables

Deej volume mixer with rubber feet

This is a DeeJ mixer designed specifically for non-multicolor 3D printers. It includes rubber feet to prevent sliding during use. Due to its compact size, some soldering is required during assembly. I've been using this mixer for about…

Order a print of this model

Printables

Knob Box for VoiceMeeter or Deej

This is a simple knob box for Deej or VoiceMeeter, This is the first working version of the box I used a Seeeduino Xiao Samd21 with a basic python script that creates a midi device https://github.com/SoniX213/MIDI_CC_Knob/tree/main

Order a print of this model

Printables

Deej Case Volume Mixer Extension

To attach it you'll need to cut a hole in the back of your volume mixer for wires and glue the extension. Materials needed: 2x 12mm M3 2x 6mm M3 4x M3 threaded insert 5x Cherry MX switch 3x Rotatry Pots Switch caps used in photo:…

Order a print of this model

Printables

Deej Volume Mixer - 5 sliders

This is a mixer I made for the deej volume control software. It uses 5 sliders which I find to be enough for all apps that I use. It uses a Arduino Pro Micro. I wired the sliders to A0 - A3 and A6. Everything is screwed together using…

Order a print of this model

Printables

DEEJ 4 Button / 4 Slider

Deej using Ali Express parts, still haven't finished mapping all the buttons. Pulling the Spotify slider all the way down pauses Spotify and the light on the button will go out the button skips the song. Edit it to your hearts content…

Order a print of this model

Printables

Deej sound mixer board

Add hands-on audio control to your PC setup with this DIY DEEJ sound mixer. Built using just four sliders an Arduino Nano, a few wires, and a USB cable it’s a simple yet powerful way to control your system volume manually. Fully…

Order a print of this model

Printables

Deej with LEDs

Built with Arduino pro micro. The Icons are swappable and taken from another Deej model . The panel holds without glue or screws, but you can glue it if you want. Each Icon has its own regular generic 8mm LED . The working version in the…

Order a print of this model

Printables

Deej Volume Mixer

I am sharing my 3d model that I designed and printed to make my project, and links will be below. Project GitHub page : https://github.com/omriharel/deej/ discord server of the project : https://discord.gg/DHGtp9CX materials you will…

Order a print of this model

Printables

minimal Deej volume mixer

deej is an open-source hardware volume mixer for Windows and Linux PCs. It lets you use real-life sliders (like a DJ!) to seamlessly control the volumes of different apps (such as your music player, the game you're playing and your voice…

Order a print of this model

Printables

Mini Deej Audio Controller Case

Remix from: https://www.printables.com/model/40358-mini-deej-audio-controller-case Snap fit case for deej audio controller. Designed to fit three slide pots with 75mm of travel and an arduino nano. See the deej github for the software and…

Order a print of this model

Printables

Deej Audio Mixer Container

I created a printable container for the awesome Deej build omriharel found here: https://github.com/omriharel I used these potentiometers: https://www.amazon.com/dp/B09D7P3RWZ?th=1 Note: They're dual rail, meaning that they have two…

Order a print of this model

Printables

Deej Project box

Deej Project box to install 5 big rotary potentiometers

Order a print of this model

Printables

Deej case

I have designed this box for the deej project, to be able to use 5 rotary potentiometers instead of the sliders. In addition, I have separated the first potentiometer slightly more than the others to use it as a general one and have it…

Order a print of this model

Printables

Vesa Mounted Deej Volume Mixer

I wanted to share my Deej volume mixer enclosure! I really liked my previous mixer but I wanted something that didn't sit on my desk and take up space when I was soldering or building gundam so I designed a vesa mount kit that hangs the…

Order a print of this model

Printables

Deej Audio Mixer / Fader Enclosure

Enclosure for 5 75mm x 9mm faders and an Arduino Pro Micro. Size is about 10x8cm. The bottom is held on with M2 screws. I use it together with the awesome deej software. To keep it from moving around a "sticky gel pad" found on aliexpress…

Order a print of this model

Printables

5.25" DEEJ audio mixer

I wanted my DEEJ audio mixed directly integrated in my PC, so I made this. It uses 3 potentiometers and an arduino and mounts in standard 5,25" bay. I then ran the USB cable on inside of computer and back to usb ports on the motherboard.…

Order a print of this model

Printables

DEEJ JD

A simple slanted case for a deej. I usually add a long description to my models, but I accidentally wiped everything I wrote... You can check out the electronics here: https://github.com/omriharel/deej Print Settings Printer Brand:…

Order a print of this model

Printables

DeejRGB

Deej Volume controller, with Corsair iCUE RGB control. Finished Album here: https://imgur.com/a/5uHYhxW More Info Here: github.com/Bupher/deej and github.com/omriharel/deej Print Settings Printer: Sidewinder X1 Rafts: No Supports: Yes…

Order a print of this model

Printables

Deej Volume Deck Box

This is an enclosure for a deej based audio volume controller. https://github.com/omriharel/deej for original or https://github.com/TheBudderNinja/deej for my revision. Category: Electronics

Order a print of this model

Printables

Deej Volume Mixer

What is Deej? Here is the github repository for details about the project. Deej discord server , here you will find lot's of helpfull information. About this model I wanted to use the arduino nano to its full potential, so all 8 analog…

Order a print of this model

Printables

Deej Sound Mixer

I used this Github project. https://github.com/omriharel/deej This should tell you everything you need to know about the programing and wiring. I just made a case and some key caps for my dials. This case fits a Arduino Mega 2560 and 5…

Order a print of this model

Printables

Cute Astronaut Deejay Figurine/Keychain

Design Concept The Cute Astronaut Deejay figurine features a charming design that merges the intriguing universe of space exploration with the contemporary world of music. The stylized astronaut figure is poised over turntables, casting a…

Order a print of this model

Printables

DEEJ Volume Mixer - 5 Channels

Yet another DEEJ Volume mixer, heavily inspired by aaldrin's design: https://www.thingiverse.com/thing:4874053 Knob is made on a lathe. Requires two M3 screws.

Order a print of this model

Printables

Simple Deej case

Order a print of this model

Printables

4 Slider DeeJ Nano (longer sliders)

4 slider box with pot or rotary encoder for 70mm sliders on solder proto board. Category: Electronics

Order a print of this model

Printables

DIY Macro Pad with Deej Volume Sliders

Order a print of this model

Printables

deej mixer pad

Order a print of this model

Printables

Deej sliders face remix

from 75x9mm sliders to support 60x9mm sliders not my model, remix check link for all files Mixer Pc volumes - Deej by Fed2828 - Thingiverse GitHub - omriharel/deej: Set app volumes with real sliders! deej is an Arduino & Go project to let…

Order a print of this model

Printables

Deej Volume Mixer Enclosure - Three Knobs

A small enclosure for a Deej unit. Holds three rotary potentiometers and an bracket for an Arduino nano. The bottom panel is held on with three M3x6mm philips head screws

Order a print of this model

Printables

Deejo 37g plate

Layer Height : 0,08mm Walls : 4 Infill/Wall Overlap : 35% Supports : No needs

Order a print of this model

Printables

Deej - Volume mixer

5 channel volume mixer using DEEJ software, github project link below : Project GitHub page : https://github.com/omriharel/deej/ Hardware needed : 4 * M3 insert 4 * Countersunk M3x4 up to M3x8 10 * M2.5 screw (probably overkill…) 5 *…

Order a print of this model

Printables

Volume mixer - Deej software

Description Aren't You tired of always needing to open the mixer on the PC to adjust the levels of apps and games? Or do You want to lower the volume of that YouTube video playing while gaming? Oh, do I have the thing for You! This small…

Order a print of this model

Printables

DeeJ "Nano"

This is a volumemixer controller, more info here : https://github.com/omriharel/deej parts list : Arduino : 1x https://store.arduino.cc/arduino-nano (or you can use any cheap clone) Master pots : 1x…

Order a print of this model

Printables

Deej enclosure v2

Another enclosure with sliders potentiometers this time, which I prefer. Deej project info : https://github.com/omriharel/deej parts : arduino mini nano : https://store.arduino.cc/arduino-nano master pot :…

Order a print of this model

Printables

DeeJ enclosure

An enclosure for that great project : https://github.com/omriharel/deej Category: DIY

Order a print of this model

Printables

deej lcd and encoder box

This is enclosure for a 16*2 lcd, rotary encoder and electronics for my version of deej. Original deej version: https://github.com/omriharel/deej/ Modified version: https://github.com/YaMoef/deej It has an usb-c opening at the back which…

Order a print of this model

Printables

Streamdeck + Audio mixer (Deej)

This device combines a Elgato streamdeck with a DIY Deej audio mixer to control separate windows programs volume. Needed parts: Front panel Back casing 4x M3x12mm bolts 4x M3 insert (Optional) 6x potentiometer (Preferably 10k Ohm) With…

Order a print of this model

Printables

DEEJ VOLUME MIXER

Update 4/2023: Updated 3D models to include versions for both Micro USB and USBC Arduino Pro Micro boards. This is my take on a 3D printed enclosure for the Deej volume mixer. The design is based on the MisteR deck. Please check out my…

Order a print of this model

Printables

Deej / Audio mixer

Hi ,this is an arduino based deej/ audio mixer ,witch can set diferent volume for some apps,mic,master,.. .I recomend to print the main body with the face down and with 0.1-0.3 mm nozzle for better quality . all things what you need for…

Order a print of this model

Printables

Desktop Volume Mixer - DeeJ

Here is my version of a DeeJ volume mixer. I changed the Arduino code to be able to use some mute buttons. I also added an option to put RGB adressable LEDs thanks to FastLED library in order to indicate the state of the audio tracks (my…

Order a print of this model

Printables

Deej Audio Fader Enclosure

Attention: This design is for non-standard sliding potentiometers. It does not fit normal sliding potentiometers. If you want to use it with normal sliding potentiometers, you need to adapt the design to fit them. This is my deej audio…

Order a print of this model

Printables

Deej Knobs and Enclosure

This Deej volume mixer I designed has 6 knobs and a display that are run by an “arduino nano”. Here's more details the open-source deej project . The 3D printed components are listed below: Front Enclosure - Potentiometers and display are…

Order a print of this model

Printables

Deej Mixer

The top is cut on a CNC router the rest is printed on an ender 3. The software for it is made by someone else: https://github.com/omriharel/deej

Order a print of this model

Printables

Deej case

This is a case for the deej volume mixer. You can choose what you print. I am in the making of custom plates to put in the squares.

Order a print of this model

Printables

Deej Audio Mixer

Yet another take on a 5-slider housing for the Deej project: https://github.com/omriharel/deej/ Print instructions The top deck and bottom plates are printed as two separate parts. Both were printed in PLA with no supports or rafts.…

Order a print of this model

Printables

Arduino nano USB-C deej base REMIX

Base of the deej volume controller with mount for arduino nano with usb-c.

Order a print of this model

Printables

DeeJ desk box

An angled box to use for DeeJ at my desk. The front panel contains icons for the following: Master Volume Chrome Spotify Steam Discord The slot in the base is made to hold an ATMEGA328P Nano board which is easily available on AliExpress…

Order a print of this model

Printables

Mini Deej Audio Controller Case

Snap fit case for deej audio controller. Designed to fit three slide pots with 45mm of travel and an arduino nano. See the deej github for the software and build instructions: github.com/omriharel/deej PARTS LIST 1X Elegoo arduino nano…

Order a print of this model

Printables

DEEJ mixer case

Case for 5 potentiometers and an arduino nano (clone) to use with deej. Two prongs on the inside need supports. Arduino might need some hotglue to keep in place. STEP file included.

Order a print of this model

Printables

DEEJ volume control case

Deej volume control case Image album with with build photos and tips https://imgur.com/a/8WKr8W9 For assembly instructions keep reading. Project Github Info regarding the Deej volume control project and arduino code can be found on the…

Order a print of this model

Printables

DEEJ mixer case - No Tabs

Printed with Black Inland PLA at 0.2mm layer height on an Ender 3 Pro. No supports.

Order a print of this model

Printables

Arduino Keyboard Joystick Extender Box and Sound Controller Thing Using Deej

Enclosures for Arduino Pro Micro, Knobs, and Joystick for Deej volume and audio extension box. Instructable to build your own: https://www.instructables.com/Arduino-Keyboard-Joystick-Extender-Box-and-Sound-C/ Updated to include blank…

Order a print of this model

Printables

Deej knob box (volume controller)

This is a remix of @nightfox939 linear slider box. This is a volume control box for your PC. You can read more about the project here https://github.com/omriharel/deej To put this together i used: Arduino Nano Every Five rotary…

Order a print of this model

Printables

Deej Volume controller Case

This is a Case for the Deej Windows Volume Controller Project An Arduino Nano fits perfectly in so that the Mini USB Port can be connected on the back of the Box. What you need to Build this: (Optional) 4x Heat Insert M3 1x Arduino Nano…

Order a print of this model

Printables

Deej Volume Mixer Case, Knob, and Label Plate

Powered by Deej . My goal with is design was to make it as small as I could and to create a design that didn't use screws, with the exception of one optional M3 screw to hold the arduino nano in place. The face plate slips into the bottom…

Order a print of this model

Printables

Volume Knob Controller for PC (deej)

A USB volume controller for volume mixer in windows to control multiple application's volumes seperately Deej (a small open-source software for windows) needs to be installed on the PC which receives the knob position information sent…

Order a print of this model

Printables

Deej - MiniMixer

Deej - MiniMixer The MiniMixer is a small RP2040 powered PC volume mixer with 4 hotkeys/Media control keys. It is designed to be printed with minimal supports, depending on your printers bridging ability, with either M3 nuts or inserts.…

Order a print of this model

Printables

Deej | Volume mixer

The design consists of 2 pieces: BASE: It is the structure where all the arduino and wiring will be stored. COVER : The base cover where the potentiometers are screwed. Components: Arduino Nano , there are cheaper options 5Pcs Aluminum…

Order a print of this model

Printables

Black Octopus Deej Volume Mixer

Adaptation for Deej arduino project to control windows volume mixer, add 16x2 display and draw new case (2options)

Order a print of this model

Printables

deej - A Physical Volume Mixer

Meet my version of deej! deej is a physical voulume mixer. Just like the volume mixer built into windows, just physical! This means that you can change the volume of an application without closing your important game. You can turn the…

Order a print of this model

Printables

Deej for Yamaha HS3

You need M3x16 screws.

Order a print of this model

Printables

Minimalistic Deej Enclousre

This is my take on a deej enclosure, featuring 5 pots and an optional space for LED indicators. If you know nothing about the project, check it out on GitHub . Parts you will need: 5 Potentiometers Arduino Nano Hot Glue LEDs (optional) 4…

Order a print of this model

Printables

DEEJ VOLUME MIXER FADER KNOBS

3D PRINTING SETTINGS Material: PLA Layer Height: .2 mm Infill: 20%

Order a print of this model

Printables

"Deej Volume Mixer less than 15€ parts!" - Extra space

I ordered the Arduino nano with the headers attached and this gave me some fitment issues with the original one. So i decided to make a bottom with some extra room.

Order a print of this model

Printables

Deej Slim Housing - 6 Dials

A 6-dial Deej! The deej project is a DIY physical volume mixer for your computer and you can read more about that on its git repo: https://github.com/omriharel/deej This is my basic slim housing to get my volume knobs somewhere within…

Order a print of this model

Printables

Deej-OLED with graphics and mute buttons

Here's the GIT repo for the project: https://github.com/wltrsjames/Deej-OLED There you'll find the Arduino code and some light build instructions Original project: https://github.com/omriharel/deej/

Order a print of this model

Printables

DEEJ - Audio Mixer

My (PROTOTYPE) take on a DEEJ hardware mixer. Requires 4 potentiometers and some m4 screws. Can (mabye) be used with screws. I hot glued a magnet into the slot.

Order a print of this model

Printables

Deej mixer Case

printed on: A1 mini with AMS Lite 25% gyroid infill res: 0.16 supports: only for the base under the nut locations

Order a print of this model

Printables

Low profile Deej enclosure

A low profile Deej enclosure, because I did not find any out there. For Arduino Nano 75mm X 8mm deep X 9mm wide PCB mount sliders off AliExpress. No screws, just use some PVA or hot glue to hold together. The icons are recessed 0.1mm -…

Order a print of this model

Printables

DeeJ Volume Mixer

Introducing a sleek and functional 3D printable case designed specifically for deej , an open-source volume mixer compatible with both Windows and Linux systems. This compact case accommodates five EC11 rotary encoders with push buttons,…

Order a print of this model

Printables

DEEJ - Physical Volume Mixer Chunky Edition Remix

Loved the original design but I wanted it to be a bit chunkier and with more chamfers. This has taken away some of the flex the original top had and the top now has a tighter fit. I have also included an updated step file as the original…

Order a print of this model