PrintedSolid Pulse enclosure spool mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A spool mount for inside the enclosure that uses the remaining Prusa arm from the Original Prusa enclosure.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 197
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I was tired of the perch spool mount on my Pulse XE that would not let the PrintedSolid enclosure door close fully. I was inspired but the remaining spool arm left after I assembled my Original Prusa Enclosure, so I made this. PrintedSolid is not very repetitive in their cut out locations, so your use will need to be measured. Bayonet mount arm is solid.
You need:
2 M3 nuts, and 2 M3x12 machine screws
2 M5 nuts and 2 M5x12 machine screws
1 M5 Push connect to the tubing size you need. The filament path off the spool is 2mm though.