PrintedSolid Pulse enclosure spool mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A spool mount for inside the enclosure that uses the remaining Prusa arm from the Original Prusa enclosure.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 197
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I was tired of the perch spool mount on my Pulse XE that would not let the PrintedSolid enclosure door close fully. I was inspired but the remaining spool arm left after I assembled my Original Prusa Enclosure, so I made this. PrintedSolid is not very repetitive in their cut out locations, so your use will need to be measured. Bayonet mount arm is solid.
You need:
2 M3 nuts, and 2 M3x12 machine screws
2 M5 nuts and 2 M5x12 machine screws
1 M5 Push connect to the tubing size you need. The filament path off the spool is 2mm though.