1 / 6
Flying Saucer Fidget Spinner — image 1
1 / 6

Flying Saucer Fidget Spinner

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Flying saucer fidget spinner.

Rating
0 / 5
Likes
14
Downloads
53
Makes
0
Views
555
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I was inspired by MechanicalNinjeer's UFO Fidget Spinner design (https://www.thingiverse.com/thing:5763899).  But, I didn't have a ‘standard’ bearing. Since I only had a small bearing, I remade the design to fit hardware that I had. I also wanted a flat UFO that fit neatly in a front pocket. This design has a total print time less than 30 minutes!

Bearing: 693ZZ (ID 3mm, OD 8mm, Thickness 4mm) https://www.amazon.com/s?k=693zz+mini+ball+bearings&i=industrial&sprefix=693ZZ%2Cindustrial%2C125&ref=nb_sb_ss_fb_1_5

I added a large washer (ID 14.5mm, OD 35mm, Thickness 2.1mm) for extra weight. There is one pause built into the saucer gcode so you place the washer inside the print. Hit “resume” and the washer is neatly sealed inside the saucer body.

I used glow-in-the dark PLA for the cockpit dome and bottom piece.

PRINT INSTRUCTIONS: Print all three parts 1x each. The saucer gcode has a pause for you to set the washer in place--select resume to continue. The bearing slips into place. Feed the bottom piece through the bearing and glue into the cockpit

Tags