DeWalt Jigsaw Wall mounting & saw-holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Redesign of this very nice and simple Jigsaw wall mount. Addition of a small bucket to store saws.
- Rating
- 3.667 / 5
- Likes
- 75
- Downloads
- 561
- Makes
- 3
- Views
- 2,658
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I remixed the original to have rounded corners on the print plate to counter warping.
I also chamfered a lot of other corners and I added a dovetail-connected bucket for saw-packages and also some slots to store loose saws. This bucket can be mounted on either side of the tool holder or, if you print 2 buckets, on both sides of the tool holder.
Onshape design is available here . The onshape is somewhat parametric designed so you can vary a bit on the sizes, although it quickly messes with shamfering, so be carefull.
The clearance for the dovetails is now set at 0.175mm, which works best for my printer (Ratrig V-Core 3.1 - 300) when printed in PETG.