DeWalt Jigsaw Wall mounting & saw-holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Redesign of this very nice and simple Jigsaw wall mount. Addition of a small bucket to store saws.
- Ocena
- 3,667 / 5
- Polubienia
- 75
- Pobrania
- 561
- Wydruki
- 3
- Wyświetlenia
- 2658
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I remixed the original to have rounded corners on the print plate to counter warping.
I also chamfered a lot of other corners and I added a dovetail-connected bucket for saw-packages and also some slots to store loose saws. This bucket can be mounted on either side of the tool holder or, if you print 2 buckets, on both sides of the tool holder.
Onshape design is available here . The onshape is somewhat parametric designed so you can vary a bit on the sizes, although it quickly messes with shamfering, so be carefull.
The clearance for the dovetails is now set at 0.175mm, which works best for my printer (Ratrig V-Core 3.1 - 300) when printed in PETG.