Display stand for RC nitro engine Traxxas TRX 3.3
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.46 – €1.79 net (excluding VAT)
For file: Motor mount TRX 33-project_0.15mm_PLA_MK3S_1h56m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.63 excluding VAT (range midpoint).
- Weight reported by the author
- 14 g
- Print time reported by the author
- 1.93 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The goal is to be able to display your unused engine on a shelf.
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 117
- Makes
- 1
- Views
- 963
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Use 2x M3x6 screws or similar length to secure the motor to the stand. The hole depth for the bolt is 30mm, so it is possible to use a tapping tool and pre-create the thread.
The lettering can be coloured with permanent marker or any other way.
I have attached the gcode showing all the settings as I printed the stands for my own engines.
I created the lettering based on Traxxas templates, who own the trademarks and proprietary rights to them.
Used filament by me: Prusament PLA Silver