Sofirn SC21 Work Light Mount - Loc Line
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount that allows you to make work light from a Sofirn SC21 flashlight and some 1/2" Loc Line. Supports Passthru Charge
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 36
- Makes
- 0
- Views
- 371
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Standard Digital File License
Been wanting a better poseable worklight. Found out that the Sofirn SC21 can run while plugged into power, so I printed a mount that snaps onto Loc Line (½" ID Loc Line) and holds the light. It has a gap for the pocket clip and the rubber charging cover, so they stay attached. Also has a passthrough gap for the USBC charging cable so you can either use it while plugged into power or unplug it temporarily.
I made a weighted base of of a chunk of steel and some magnets and pipe fittings I already had but a base could easily be printed.
Print right side up with no supports. May require a brim to ensure the print sticks to your print bed. I printed it in PLA but PETG might be better. I printed it at 60% infill. It took a few tries to get the fit onto the Loc Line perfect, the model I uploaded was my final successful attempt. If yours is too tight/loose you might need to scale the model slightly in the X/Y direction.