Counting matching models…
Flashlight holster designed specifically for the Sofirn IF22A. Parametric .f3d file included so you can customize the clip to your needs. Easily remixable for other flashlights. Updated model no longer has a bottom, unlike in the photos.…
Print approx. €3.64–€4.45 excl. taxPreliminary estimate for PETGSource material: PET
PLA / PETG / TPU -> transparent Works all fine, no support needed Update: Ich habe die Decke oben nochmal bearbeitet. Sie ist jetzt oben etwas Dicker. Der Druck hat sehr gut funktioniert mit TPU Transparent. Und sry ich hatte einen Fehler…
Sofirn SH40 holder for IKEA Skadis board using the T-clip system. Made to be able to store it vertical without the need of removing the clip attachment. Perfectly printable in PLA or PETG with the print profile uploaded using minimum…
A bike helmet mount adapter for the Sofirn SC18 rechargeable flashlight. Adjustable angle and mounting plate that can be attached to a helmet by zip tie or other means. Assembly - Zip tie or otherwise securely fasten the helmet mount onto…
You can buy these from me here! This Skilhunt HB3 headband works great with the mount. This rotating 3D-printed mount allows you to easily attach your SC21 or SC21 Pro to any part of a 1" wide flashlight headband. Designed specifically…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Sofirn HS10 mount snaps right into the Skilhunt HB3 headband! Works with Sofirn HS10 series headlamp. The width of the mount is made to fit between…
This model of a Goodman handle has been specially developed for the Sofirn SD05 and Wurkkos DL30 diving lamps. Print out all parts remove the supports insert the nuts for the screws screw everything together Dieses Modell eines Goodman…
Der Adapter hat einen Innendurchmesser von 36 mm und passt perfekt auf die Sofirn SP33S Taschenlampe. Rotlichtscheibe habe ich aus einem alten Belichtungsgerät entfernt und die entsprechende Größe ausgefräßt. Bei mir passt die Scheibe…
lens cap for sofirn sp32a flashlight to prevent scratches. The flange is 23.6mm in diameter and has a length of 22mm. Print with a high temperature filament and keep the flashlight on a low setting or off.
Sofirn SP36 Pro Carry Handle Compatible with this diffuser . Support needed for Handle. Uses 2x M4x16mm bolts and nuts Update 01/06/2025: Added STEP files
This 3D model provides a replacement mount for the Sofirn HA05 headlamp with a modular design. The modular system allows the individual holders to be printed separately and easily replaced if one breaks. Key Features: Modular Design: The…
Designed specifically for the Sofirn SC18 and SP33S flashlights , these accessories attach to soften and focus the beam, providing a more diffuse and evenly distributed light. The SC18 model underwent several iterations to ensure it is…
Držák na čelovku umožňující její montáž na popruh s nasazeným clipem.
Mount for the Sofirn SC18. You can screw it inplace or double sided tape should probably work also. It has a flat side against the wall
Even though my Sofirn IF23 flashlight already has a magnetic end cap, it's rather weak, and often not in the position I need it to be in. This mag mount solves the issue for me, and it's specifically tailored to fit this light. The…
My version of Sofirn LT1S shade. It just snaps on. Designed to be compact and have printable angles on virtually any printer (40º). Notes: Printed without supports with 0.28mm layer heights and 0.4mm nozzle. I used skirt to improve…
This is a little holder for a Sofirn SP36/Pro Flashlight. The holder has a 50mm x 20mm Hole, if you want to use it for anything else. It has a print in place insert attached and can be printed without support.
A NEW AND MUCH IMPROVED VERSION IS NOW AVAILABLE!!! You can download it here . This is a rotatable cover I made for my Sofirn IF22A so that it wouldn't turn on accidentally in my bag. The cover twists around the barrel of the flashlight…
A friend of mine wanted to mount his Sofirn SC31 Pro in his car and asked me to knock up something simple he could use with cable ties. This is it. I made two versions for different mounting options (vertical/horizontal), both are in the…
This is the V2 of the rotatable cover I made for my Sofirn IF22A so that it wouldn't turn on accidentally in my bag. The cover twists around the barrel of the flashlight to allow for charging, storage, or use. Put it on the flashlight by…
Sofirn SC33 Flashlight Gridfinity Storage Holder - 21700 Battery Organizer 🔦 Gridfinity-compatible holder (1x4) designed for Sofirn SC33 flashlight storage and organization. Features dedicated compartments for 21700 battery storage,…
Works for Astrolux EC06 or Sofirn Q8 Plus in combination with a Maglite diffuser cone (meant for C and D type flashlights). Material: PETG (preferably transparant) Low Quality (0.28 mm layer height) Wall count: 4 (no infill) I've tested…
This is a thin but sturdy cap for the Sofirn Q8+. The fit is perfect; it will not accidently come off, but you can easily pull it off by hand. Twist the tail cap slightly loose while the cap is on to avoid turning the light on and melting…
Carrying handle for my Sofirn BLF-LT1 Lantern Flashlight. Written in open scad and the code is a bit of a mess. sorry.
Quick little diffuser add on for the Sofirn HS10, I have printed this in white PETG, this gives a very diffused glow, but does reduce the overall light output, I think printing with some clear filament might be better(?) The diffuser can…
A couple of simple diffusers to turn the Sofirn SC13 into a little lantern - one has a hole in so some light can still escape to “ceiling bounce” Designed to work with the pocket clip in place, but works without it. print upside down with…
Magnetic mount for the Sofirn HS21. Pause the print at the top of the pockets and insert up to 5 8mmx3mm circular magnets. Printed in PETG-CF at 0.2mm layer, seems plenty strong enough. Magnets will hold torch upside down, and print seems…
This is a mount for the popular 8000 lumen flashlight from Sofirn - the SP36 Pro. It consists of an internal gasket that engages with the two recesses in the handle and an external shell which uses a 4mm x 35mm screw to secure. The gasket…
A small flashlight clip for your Sofirn SC31 flashlight, or other compatible 7mm High 21mm diameter flashlight needs. Preferably print in ABS or something else stiff and strong. Print diagonally to reduce points of failure.
If you want to update the firmware of your Sofirn SC31 Pro and you had a newer revision with exposed UPDI pads, you can use this adapter with pogo pins to easily flash a new firmware to your Sofirn SC31 Pro. Print instructions Printed…
You will need 3x M3x20mm screws. The TPU seal is optional. There is enough play to allow for storing the flashlight with the tailcap ¼ turn unscrewed. I recommend printing the box, lid and latch with “Fuzzy Skin” applied only to contours,…
Really simple, a mount for your SP36 pro. It might work with other flashlights that are 45mm diameter, but you might need to remove the ridges. Works with quadlock mounts. You will need 2x 24mm long M3s and 2x m3 heat inserts that are…
I wanted to have a Goodman handle for my SoFirn SD-05. So I created this model. Any other 26mm light can be clamped as well. Solidworks files are included, so if you want to make one for a different diameter, be my guest. Just make sure…
Needed Hardware: 4mm Bungee Cord 4x 3mm M3 Bolts (stainless) 4x 3mm Heat-Set Inserts Print Instructions Print Bottom Half in PETG (or similar) with >5 walls. No supports Print Tpp in TPU 98A (or PETG alternatively) with 8 walls
What Is It? This is a modular lampshade which can fit on more than 21 different flashlight models. There are 5 different lampshade variations: one plain shade, and four shades with raised lettering on the inside, so that when illuminated…
Print with: 7 perimeters no infill no top or bottom surfaces TPU ~98 sore hardness (e.g. Extrudr Flexible Medium)
I have a great, nice flashlight Sofirn HS42. But the grip might be better. So I have used my 3D printer to do it. Features: Nice feeling in a hand Easier and faster finding a good grip with tour hand in a pocket A flashlight can be put to…
I wanted to wear the Sofirn SC13 as a head lamp, so I designed this holder in FreeCAD. You can use elastic straps up to 30mm Print with PETG to provide enough flexibility for the arms that hold the light. Any recommendations are welcome,…
I found somewhere this light diffuser with 49.5mm ID, and thought “what if I could make it fit on my Sofirn SP40 right-angled flashlight?”. Turns out the diffuser was an old model for the Sofirn SP36. And that's it, this clip has a…
Dji Neo Flashlightholder for Sofirn Mini SC13
Deutsch Allgemeines Für die meisten Lampen sind 3 Dateien hinterlegt um unterschiedliche Lampenpositionen zu realisieren. Falls bei einem Modell eine Version fehlen sollte, ist dieses konstruktiv nicht umsetzbar. xxx_90 degree_single_head…
I combined some objects in the slicer and made this for the lolz
The Sofirn HS10 is a lightweight flashlight with well-tuned brightness levels. It would be ideal for trail runs, but unfortunately, the rubber strap attachment is too flexible. This causes the flashlight to bounce around on your forehead…
Sofirn SH40 holder for IKEA Skadis board using the T-clip system. Made to be able to store it vertical without the need of removing the clip attachment. Perfectly printable in PLA or PETG with the print profile uploaded using minimum…
This is a handle with a receptacle for the "butt" of the flashlight. Designed it this way, because the "handle only" versions out there, looked weak (only 1 connection point for screw). This one, has a base where you insert the "butt" of…
A bike helmet mount adapter for the Sofirn SC18 rechargeable flashlight. Adjustable angle and mounting plate that can be attached to a helmet by zip tie or other means. Assembly - Zip tie or otherwise securely fasten the helmet mount onto…
This is a tool for removing or installing the button bezel on Wurkkos/Sofirn branded flashlights with the translucent 15mm wide button like the one shown below. 0.4mm nozzle and 0.2mm layer height is recommended. Print STL in default…
bezel tool for sofirn hs41, for YAJIAMEI XLamp® lenses. Sofirn had a https://ali.click/vbmtg15 lenses, you can change angle of view from 10 to 60 degrees.
Keep your Sofirn SC13 lens safe from scratches, dust, and pocket wear! This is a lightweight, friction-fit protective lens cap designed specifically for the Sofirn SC13 flashlight. It snaps securely onto the bezel, making it perfect for…
We keep a Sofirn SP32A near a door and I thought it’d be nice to have a snug little wall mount for it. First time modeling anything in Fusion 360 and went through a few iterations for a nice hold, no supports, and a touch of styling.…
Mount for Sofirn SP40 on 25.4mm handlebar (1 inch). Printed with PLA, 0.2mm layer height on Ender 3 Holes are for M3 nuts and bolts EDIT: Added shorter mount
A diffuser for the Sofirn C01 flashlight. Print in vase mode. Category: Tools
A small tool for unscrewing the bezel on a Sofirn SP40 head torch. The indents in the bezel are quite small, so this print needs to be pretty accurate - I have access to a Formlabs Form 2 resin printer, but some tinkering might be needed…
I wanted magnets built into the tailcap of my BLF LT1 so I can stick it to surfaces, and I didn't want to have to carry around one of those tripod-thread magnets. This adapter holds six of these magnets inside the tailcap, and they're…
The LT1 Mini lantern is a little top heavy, so i wanted a base to stop it from tipping over. The print pictured is in TPU, but i printed one in PLA as well, and it works just as well. I used 5% infill, but I'm sure 0% would also work…
I added magnets to my LT1 and wanted a soft foot to prevent surface scratches. Done in tinkercad and printed in TPU. It's going to reduce magnet strength so test it before trusting it. I was able to hang it off the front and side of my…
Handlebar mount for Sofirn IF25A flashlight Necessary parts: M5 bolt - DIN912 (length: 12-16mm for Ø22.2 version | 14-18mm for Ø31.8 version) M5 hex nut - DIN934 or M5 square nut - DIN557 (files available in 2 versions) velcro strap or…
Gopro mount for sofirn IF25A flashlight. Fits tightly around the flashlight. Can be used with upto 20mm wide velcro strap. Printable without supports
SOFIRN BLF LT1 Lantern Stand I modeled this lantern stand in Fusion 360 for the Sofirn BLF LT1 (see below). The multi color effect is just two color changes at the right heights. It's about 3.6 inches wide, .5 tall.
This is a diffuser for Sofirn's Q8 Pro. By design, the fit is tight enough that the flashlight can be hung from the integrated lanyard loop attachment point. I printed this in esun GITD PLA with 10% gyroid infill and fuzzy skin (outside…
Printed it with PLA (Glow in the Dark) Infil 20% 0,2mm Layerhight 2 Contour lines Seems to be sturdy. Not fieldtested yet.
This is a remix of GreenBolivian's lense caps for BLF Q8 resized to fit the Q8 Plus, the plus is a little larger (model scale 107.5%). I would suggest printing in a transparent material or something that can handle higher temps than PETG.…
Printed this on my stock ender 3 with marble PLA. I used a 0.4mm nozzle at 0.2mm layer height with 15% gryoid infill and 6 perimeters for strength. The original bezel CAD was simply subtracted from the model with no additional offset…
Here is my holder called "The Forehead Beacon Tower" 🤪 After two mountain bike tours in the darkness with smartphone LED, I decided to buy a cheap but very good headlamp. In this case it is a Sofirn SP40 with 1200 lumens. I fits perfectly…
You should print it with PETG, no supports needed. The clip needs some flexibile material otherwise it breaks. If the lamp should move while driving, you can add a rubber band and clip the lamp to avoid changing angle.
This is a Goodman Handle with bungees for the Sofirn SD01. The design has already been tested over months and found to be good. In the back, another bungee is pulled through the lamp to fix the rear part on the arm. Feel free to leave a…
This bracket is mounted on the front of the lamp. Only a ~20mm 3m screw and a 3mm insert as a nut is needed. With no infill but 9 walls printed from PETG. Print Settings Printer: Sidewinder X1 Rafts: Doesn't Matter Supports: Doesn't…
Just a simple, easy, fast printing light diffuser for the SP10Pro. Friction fit on the head as per my light. Easy to scale up/down a little for clearances. I've included 2 files, one straight off the diameter of the light plus 1.6mm for…
You can buy one of these diffusers from me here! Consider supporting us on Patreon! Please see the assembly instructions photo! No supports required! This is a flashlight diffuser that distributes the light radially and downward to…
You can buy one of these diffusers from me here! Consider supporting us on Patreon! Please see the assembly instructions photo! No supports required! This is a flashlight diffuser that distributes the light radially and downward to…
Light diffuser for IF22 torches, tested in white filament, may also work well with translucent filament. Print with 2 top/bottom layers for best light passthrough, with <20% infill
You can buy one of these diffusers from me here! Consider supporting us on Patreon! Please see the assembly instructions photo! No supports required! This is a flashlight diffuser that distributes the light radially and downward to…
You can buy one of these diffusers from me here! Consider supporting us on Patreon! Please see the assembly instructions photo! No supports required! This is a flashlight diffuser that distributes the light radially and downward to…
Been wanting a better poseable worklight. Found out that the Sofirn SC21 can run while plugged into power, so I printed a mount that snaps onto Loc Line (½" ID Loc Line) and holds the light. It has a gap for the pocket clip and the rubber…
You can buy one of these diffusers from me here! Consider supporting us on Patreon! Please see the assembly instructions photo! No supports required! This is a flashlight diffuser that distributes the light radially and downward to…
Flashlight holder for Sofirn SC21. Great for a night light. Use a brim for adhesion or the hook might warp outwards a bit. The one in the picture was printed in PLA, 0.12mm resolution.
Habe mir ein Griff gemacht damit man sich die Hände nicht verbrennt wenn die Taschenlampen längere Zeit an ist.
PLA/ PETG / TPU -> transparent Works all fine, no support needed Ich habe die Originaldatei (stl) nicht mit hochgeladen, da die .3mf Datei so funktioniert muss nur gedruckt werden mit den Einstellungen. Mit PETG / PLA Transparent / TPU…
You can buy these from me here! This Skilhunt HB3 headband works great with the mount. This rotating 3D-printed mount allows you to easily attach your SC21 or SC21 Pro to any part of a 1" wide flashlight headband. Designed specifically…
light cone for sofirn sp32a flashlight The flange is 23.6mm in diameter and has a length of 22mm. Print with a high temperature filament and keep the flashlight on a low setting. The light cone is 150mm long. Avaliable in .4mm and 1mm…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Sofirn HS10 mount snaps right into the Skilhunt HB3 headband! Works with Sofirn HS10 series headlamp. The width of the mount is made to fit between…
This model is designed to be printed in a FLEXIBLE FILAMENT such as TPU or other TPE. It WILL NOT WORK if printed in a rigid filament such as PLA or ABS. The loop can be stretched around the flashlight to settle in the slot for the clip.…
This is a red lens holder for a 24mm Sofirn flashlight. Red light does not affect night vision. Body printed in TPU. .5mm ribs help friction keep this cap in place. Lens printed in red transparent PETG with as many perimeters to make…
