1 / 2
Button bezel tool for Wurkkos/Sofirn flashlights (15mm bezels with 4 indents)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tool for removing or tightening the bezel for the button on Wurkkos/Sofirn flashlights. Tested on Wurkkos FC11C.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 65
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This is a tool for removing or installing the button bezel on Wurkkos/Sofirn branded flashlights with the translucent 15mm wide button like the one shown below.
0.4mm nozzle and 0.2mm layer height is recommended. Print STL in default orientation.
Printed on A1 mini with PLA and tested on Wurkkos FC11C. It needs to be pushed into the button a little for the teeth to engage with the bezel. Do not use excessive torque or the plastic teeth on the tool will deform.