Voron mgn12 demonstration and test stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A stand with mgn12 profile for test purposes or for presentation. I built this for the voron toolheads.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 75
- Makes
- 2
- Views
- 639
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- GNU General Public License v3.0
This was designed to test the magnetic power of the Voron Tap. Sets are sold with magnets that are much too weak, which leads to poor results in the upper Hz-range when you use input-shaper. A positive side effect was that you could also attach toolheads to it and put them in a display case in a very decorative way.
A total of 8x M3x5x4 (voron like) heatsets are required. Four each for the mgn12 profile and for the arm. Four M3x6 SHCS are required for assembly.
For the second version is planned to make the arm a little thinner and make everything a little more "Voronlike".