Chefman Hot Water Kettle Lid
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement for the center part of the lid of a Chefman electric hot water kettle.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 361
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Public Domain
Replacement for the center part of a Costco Chefman hot water kettle lid.
Disclaimer/WARNING
You can potentially hurt yourself with this item if you pour too fast and boiling water somehow dislodges this item. Use at your own risk, check its condition and security periodically. Using PETG and PLA are risky because the printed threads will fail after repeated high temp exposures.
Printing
Print with the flat side of the model on the build plate, no supports. Any fill, I used triangles at 20%. Recommend 4 perimeters. Use ASA/ABS for the heat resistance, this is what it is designed to be printed in. If you must use PLA/PETG, use something like 99.5% scaling so the center hole fits the kettle. PLA/PETG/Nylons/PAs not recommended since they creep (boiling water, >100C vapor) and the threads will likely fail.
Versions
Beta2 has a threaded system, I thought this is important so that someone doesn't pour water all over their hand. Coarse thread, two pieces now. Added a bit more coverage of the top around the hinge. I think this design is pretty good, will just make a couple refinements then publish a non-beta version of the model with STEP, STL, 3mf, F360.