Modular Icosphere shade for IKEA "Lampan"
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.30 – €0.37 net (excluding VAT)
For file: connector_tall_x5_015mm_pla_mk3s_29m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.34 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 29.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This shade is modeled to fit the base of the "Lampan" lamp from Ikea.
- Rating
- 0 / 5
- Likes
- 51
- Downloads
- 114
- Makes
- 0
- Views
- 1,547
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Public Domain
This shade is modeled to fit the base of the "Lampan" lamp from Ikea.
It is printed in 5 bottom parts and 5 top parts and is easily assembled, completely without glue, using 5 small connector pieces where the corners meet.
https://www.ikea.com/us/en/p/lampan-table-lamp-with-led-bulb-white-90416325/
Print instructions
I recommend printing the pieces with brims turned on as there is not allot of surface coverage on each piece to the build plate.
0.2mm with 0% infill works fine. There are parts that bridge poorly which will leave small filament noodles, but they can be trimmed easily with an x-acto knife.