Modular Icosphere shade for IKEA "Lampan"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This shade is modeled to fit the base of the "Lampan" lamp from Ikea.
- Ocena
- 0 / 5
- Polubienia
- 51
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 1545
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Public Domain
This shade is modeled to fit the base of the "Lampan" lamp from Ikea.
It is printed in 5 bottom parts and 5 top parts and is easily assembled, completely without glue, using 5 small connector pieces where the corners meet.
https://www.ikea.com/us/en/p/lampan-table-lamp-with-led-bulb-white-90416325/
Print instructions
I recommend printing the pieces with brims turned on as there is not allot of surface coverage on each piece to the build plate.
0.2mm with 0% infill works fine. There are parts that bridge poorly which will leave small filament noodles, but they can be trimmed easily with an x-acto knife.