1 / 1
20x4 LCD Case | Arduino
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Its a case for an LCD Case with dimension 20x4. Perfect fit with the I2C Serial on the back.
- Rating
- 4.667 / 5
- Likes
- 86
- Downloads
- 1,455
- Makes
- 5
- Views
- 5,963
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Hi everyone, this is a case for a 20x4 lcd.
It has an I2C on its back. As you can see the cables for the I2C going out on the left side.
It has holes on its back to mount it where ever you want.
Bring front and back together with screws. I used 3.0mm for it. If you want them the same depth like on the picture, just screw them in for a bit and break the inner plastic circle. Afterwards you should be able to screw them deeper.
Happy printing. :)