MMU Buffer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my version of the buffer required for the MMU (or MMU2s) I based my design on other similar buffers but wanted…
- Rating
- 4.25 / 5
- Likes
- 273
- Downloads
- 821
- Makes
- 9
- Views
- 14,658
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
This is my version of the buffer required for the MMU (or MMU2s)
I based my design on other similar buffers but wanted to add some modifications so I redesigned this one completely from scratch.
The wheel turns very smoothly on a 6200 bearing.
I wanted a relatively big wheel so the turn radius is not too tight to avoid friction. The total assembly is 12.5cm tall and 14cm wide.
2 M10 fittings guide a 4mm PTFE tube all the way to the wheel.
Friction is very low.
Also a nice feature is the wheel turning while printing.
Parts needed :
- 4 printed parts
- 2 x M10 PTFE fittings
- PTFE tube
- 1 x M3x30 bolt
- 1 x M3 nut
- 2 x zipties
- 1 x 6200 bearing (10x30x9)
Print instructions
Printed with PETG Prusament Galaxy Black
Layer height : 0.2mm
3 perimeters
5 top & bottom layers
20% gyroid infill
No supports required
Print time : approximately 16 hours
Plastic required : +- 150g