ShopVac Small Crevice Nozzle - Long Version
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is made for ShopVac or any other vacuum which uses a hose with an internal diameter of 1.5 inches (38 mm).
- Rating
- 4.5 / 5
- Likes
- 22
- Downloads
- 191
- Makes
- 1
- Views
- 815
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
This is made for ShopVac or any other vacuum which uses a hose with an internal diameter of 1.5 inches (38 mm). I made it specifically to fit into the slots on the base of my drill press, but of course it can be used to reach other hard to access areas.
Originally I made a single version of this,but it worked so well I made two other versions. The three versions are :
- Small Crevice Nozzle - Short Version
- Small Crevice Nozzle - Long Version (this one!)
- Small Crevice Nozzle - Skinny Version
For the first two, the narrow end of the nozzle has a width of .5 inches (12.7mm), for the third version the width is 0.25 inches (5.1mm).
The OnShape 3D CAD files for this are here :
Print instructions
Print in PLA using the 3mf file provided; otherwise :
- perimeters = 3
- infill 0%, concentric top and bottom
- brim recommended
- no supports required