Boosted Board Remote Ring V1/2 REMIX
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of the original design by JakeMethner:https://www.thingiverse.com/thing:2219299 The original design…
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 24
- Makes
- 2
- Views
- 190
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
This is a remix of the original design by JakeMethner: https://www.thingiverse.com/thing:2219299
The original design has served me well for a while now but i was staring to get annoyed with a gap that was formed by using a larger than intended o-ring. This was fixed by extruding the whole model down by 0.75mm this should add 4/5 layers to the bottom of the model. I also ran into an issue that the bridge over the o-ring to the middle bolt would develop a hole when sliced (this might just be a problem with my slicer settings) to fix this I moved the bridge over to the bolt side by 0.6mm, this is the furthest I can move the bridge over while accounting for the space taken by the stock screw head. This added material to the bridge so increase overall part durability and longevity.
Thanks to JakeMethner for the amazing work on the original design!
Category: R/C Vehicles