1 / 4

Cobalt Strain Relief Mold

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

gwa

@gwa_316020

Strain Relief for Bluetrail Engineering Cobalt Connectors

Rating: 0 / 5
Likes: 2
Downloads: 22
Makes: 0
Views: 319
Reviews: 0

Updated at source: Feb 26, 2023

Model information

Source: Printables
Category: RC & Robotics
License: Creative Commons — Attribution — Share Alike

Details Files (16)Makes & comments (Makes: 0) (Comments: 0)Remixes (0)Collections (1)

Strain Relief for Bluetrail Engineering Cobalt Connectors

https://www.bluetrailengineering.com/product-page/cable-termination-kit

These are best printed upright.

To post process I put a piece of 400 grit sand paper on a sheet of glass and wet sand the mating faces until flat. Clean out any stringing inside the mold halves. Drill out the holes to 3mm.

Apply mold release. You can use vaseline thinned with a bit of mineral turpentine (mineral spirits) in a pinch.

I use 60 shore urathane resin.

https://www.amtcomposites.co.za/product/vytaflex-60-1kg-3/

The following square nuts are used.

https://www.aliexpress.com/item/1005003317703032.html