EBB36 mount for Voron Stealthburner (CW2)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Minimalistic EBB36 1.2 mount for Voron Stealthburner (Clockwork 2)
- Rating
- 5 / 5
- Likes
- 50
- Downloads
- 403
- Makes
- 1
- Views
- 3,698
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
This is my take on EBB36 canbus board holder for Voron Stealthburner. I have taken the model from Kotvic (Thank you!) and pretty much redesigned it to address some issues I have found with the original model:
- Heat inserts holes were too small (4.5mm) - changed to 4.7mm.
- Heat inserts for the clamp were pushing plastic onto the corrugated hose groove making the hose and clamp attachment difficult - fixed by removing the plastic there.
- Raised the EBB36 mount a bit to give more space to the board rear.
- M3 screw holes (thread and head) were a bit small, making the assembly more difficult.
- Due to 3, I had to move the corrugated hose groove up to align with the EBB36 data port.
Print with standard Voron settings.
Unfortunately, If you need a different corrugated hose diameter, there are no user parameters to change in the attached CAD. However, CAD is attached.
Required hardware:
6x M3x8mm BHCS or SHCS screw
4x M3 Threaded Insert (M3x5x4, Voron standard)
This is the hose I used (was the quickest shipping): RANIT 3M/9.8Ft Long Corrugated Tube Black Plastic 10Mm x 7Mm Flexible Corrugated Conduit Pipe Hose Tubing https://a.co/d/iro3RRV (Not an affiliate link)