MTG Mana Companion Cube Deck Box with 6x3 magnets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of MTG Mana Companion cube Double deck/Commander deck box to latch closed with 6mm x 3mm round magnets
- Rating
- 0 / 5
- Likes
- 86
- Downloads
- 275
- Makes
- 0
- Views
- 2,281
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Following the basic idea from dolmdemon but only using the original models from n2o1. I remixed this design to use 6mm x 3mm round magnets instead of the 8mm x 3mm round magnets dolmdemon used. My motivation is simply that I have a lot of cheap 6x3 magnets and no 8x3.
I did a few things differently than dolmdemon to get the most out of the smaller 6x3 magnets.
- Reduced spacing between to magnets to be only 1mm below the surface. Previously 1.5mm and 3mm for box and lid respectively
- Option to double up magnets in the box, lid, or both. Testing indicated an increase in force 50% when doubling up one and 90% when doubling up both. 6mm x 6mm round magnets would likely have the same effect and would fit the same if you have them.
Unfortunately FreeCAD could not make a solid out of the stl files from n2o1 or dolmdemo. Therefore I did all the remix work in prusaslicer. Therefore there is only 3mf files and no stls. Designed to be sliced at 0.2, 0.15 or 0.1 layer heights.