1 / 3
standoffs for Fractal Meshify C Front Mesh
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are standoffs meant to standoff the front mesh assembly of the Fractal Design Meshify C
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 32
- Makes
- 0
- Views
- 822
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
These are some quickly assembled standoffs to extend the Mesh section of the Fractal Design Meshify C. The intent is to give +/-25mm of space so that a longer GPU can be used in combination of a standard thickness radiator by placing the fans outside the chassis, behind the Mesh.
Magnets are 8mm x 3mm disk type, and I recommend minimum VHB for adhesion, though epoxy or other liquid adhesives may be required to properly bond the standoffs to the chassis.
This item was requested by /u/Quickstreek