100mm solar filter holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fits 100x2mm square filters. Tested this on my formatt HITECH.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 20
- Makes
- 0
- Views
- 223
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
Should fit other 100x2mm filter holders.
Wanted something I can make more of if the film tears. 12x12 sheets cost about 30 bucks and you can make several with one sheet. Use the front face as a template to cut the film and be careful, even a single hole in the film can damage your sensor. Also created a case for the filter since the film is so fragile.
Tolerances are a bit tight as I wanted everything was snug so I wouldn't need to glue anything. Make sure your printer is calibrated or expect to do some sanding. The front face can probably be scaled down on the Y axis by about .1mm for a better fit, but i was able to press it in and all was good.
Enjoy…