100mm solar filter holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits 100x2mm square filters. Tested this on my formatt HITECH.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 223
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Should fit other 100x2mm filter holders.
Wanted something I can make more of if the film tears. 12x12 sheets cost about 30 bucks and you can make several with one sheet. Use the front face as a template to cut the film and be careful, even a single hole in the film can damage your sensor. Also created a case for the filter since the film is so fragile.
Tolerances are a bit tight as I wanted everything was snug so I wouldn't need to glue anything. Make sure your printer is calibrated or expect to do some sanding. The front face can probably be scaled down on the Y axis by about .1mm for a better fit, but i was able to press it in and all was good.
Enjoy…