Doorswitch for V2.4 (and other printers)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
this is a doorswitch, that triggers, when you open the door and/or close it again
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 51
- Makes
- 2
- Views
- 667
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
this is a doorswitch, that can activate whatever you like. the ideas are endless, maybe use it as lightswitch or as door detection.
Print them as they are provided, maybe with a brim. you can mirror it for the use on the right side.
BOM:
- a switch printed (maybe mirror it if you want it for the right side)
- 2x M3x12 SHCS
- 2x M2x10 selftapping (maybe snip off the tip)
- 1x regular d2f switch
- some wires
- a plug of your choice
here is an example config for klipper:
[gcode_button door_switch]
pin: #^!rpi:gpio5
release_gcode:
CHAMBERLIGHT_ON
press_gcode:
CHAMBERLIGHT_OFF
You may want to put the same foam tape you have around your panel in front pf the switch to avoid scratches and to close the gap between the trigger and door.
Please post a make AND what you use it for with you config. I am excited to see the usecase you come up with.