Low-Filament MacBook Air Laptop Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple laptop stand for my 2020 Mac Air; the notches that hold it in place are low enough that you can't feel them on…
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 75
- Makes
- 1
- Views
- 1,963
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
Simple laptop stand for my 2020 Mac Air; the notches that hold it in place are low enough that you can't feel them on your wrists when you're using the keyboard. I made to use as little material as possible but not compromise on usability (I made it during the start of the pandemic, when there wasn't any filament stock anywhere). I made this to fit on my Prusa MK2.5 (250mm x 210mm x 200mm build volume) so it might not fit on some printer's build plates
Mirror the file to get both sides and glue two equal lengths of 1/2" PVC into the holes; length is your preference.
PLA at 0.2mm layer height with 3 perimeters and 5%-10% infill was plenty strong for the laptop.