1 / 2
BigTreeTech Pi TFT43 v2 Housing for Creality
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A housing and mounting plate for the BigTreeTech Pi TFT43 v2 that fits Creality printers.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 54
- Makes
- 0
- Views
- 673
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- BSD License
This is a model for a housing that fits the BigTreeTech Pi TFT43 v2 and mounts it to the aluminum extrusion found on Creality CR-series (and probably Ender series) 3D printers. Tested specifically on my Creality CR-10 Smart. Because of extrusion settings and tolerances, the mounting features may need modification so I've included the FreeCAD files that were used to generate the STLs. In addition to the printed parts, you will need:
- 4x M2*H4 threaded inserts
- 4x M2x6mm bolts
- 4x mounting screws from BTT Pi TFT43 v2 kit
The threaded insert holes may be a little large but YMMV.