Ikea STYRBAR wall flush mount holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A flush mount wall holder for the Ikea STYRBAR switch that could directly replace my old switches.
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 234
- Makes
- 5
- Views
- 1,347
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
This holder is a drop-in replacement for the original switch on -I assume- a European flush mount. None of the models I found was compatible with this system.
The whole mount is 82x82mm. The switch goes in firmly without using magnets or double sided tape. It's symmetrical, so you can mount with the best looking side up:-)
One of the photos about the wall mount where you can install it
Update:
Uploaded some photos and screenshots of the double mounts and the physical switch accessory you can attach to some of the models with a screw.
The accessory I have for example is: "@artogahr_338153: for future reference, this is a 45x22.5 1M standard switch module. Example: Legrand 278001L"
Some Cura settings I used:
20% infill
0.16mm Layer height
Using adaptive layers
No supports (except for the physical switch holder)