Bialetti Espresso capsule holder (inside door)

Changelog:

Update 20230307: I've added a version for a 300mm2 buildplate as well, either for the smaller printer or for the smaller cabinet. 

----------------------------------------------------------

I designed all from scratch, taking clues from other inside-door coffee capsule holders, though.

The problem with Bialetti coffee capsules is, that they are rather big and the back/bottom of the capsule is always either normal gray aluminium colour (for the official ones) or nicely coloured for some other expensive compatible -but just as difficult (for me) to find- ones. 

Or transparent plastic for the easier to find (again, for me), and much cheaper knock-offs.

And the type/name of the coffee inside is shown on the top, so that should be visible.

That meant I had to reverse the mounting grove and had to ‘show’ the top instead of the (with Nespresso common) coloured bottom.

The 3MF/STL files included are meant to be printed on a 300 mm2 or 350 mm2 bed, so 2 tailored versions are delivered.

The print settings are not critical, I did mine with 0.4 mm nozzle, 0.2 mm LH, 3 bottom/top layers, 3 walls, 40% infill. But nothing is critical as the forces are pretty low anyhow.

Please post a make if you did make one, it would be nice to see it in the wild too. And it's good for the stats ;)

I might post small improvements once in a while based on my experience or other's experiences, so please leave a comment on how things went for you.