M5 T-nut 2020 Thickened
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Thickened version of NiftyStudioMX's M5 T-nut.
- Rating
- 4 / 5
- Likes
- 10
- Downloads
- 137
- Makes
- 1
- Views
- 612
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
This is simply a thickened and squared-off version of NiftyStudioMX's M5 t-nut for 2020 extrusions, I found the original fit great but split apart on the narrow wall when inserting the bolt (printed in PETG) so I just added a couple of mm on each end and squared it off. This new thickened version is now 9.6mm wide.
Could be printed in any material I suppose but it should be matched appropriately with the application. I've used PETG and found surprisingly good strength, I think being contained by the extrusion itself provides some additional support against breaking. Recommend 0.2mm layer height and 0.4mm walls printed solid (i.e. 100% infill or walls).
You might see some slight imperfections on the .stl that are a legacy from the original file but these won't have any influence over the print.