M5 T-nut 2020 Thickened
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thickened version of NiftyStudioMX's M5 T-nut.
- Ocena
- 4 / 5
- Polubienia
- 10
- Pobrania
- 137
- Wydruki
- 1
- Wyświetlenia
- 612
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
This is simply a thickened and squared-off version of NiftyStudioMX's M5 t-nut for 2020 extrusions, I found the original fit great but split apart on the narrow wall when inserting the bolt (printed in PETG) so I just added a couple of mm on each end and squared it off. This new thickened version is now 9.6mm wide.
Could be printed in any material I suppose but it should be matched appropriately with the application. I've used PETG and found surprisingly good strength, I think being contained by the extrusion itself provides some additional support against breaking. Recommend 0.2mm layer height and 0.4mm walls printed solid (i.e. 100% infill or walls).
You might see some slight imperfections on the .stl that are a legacy from the original file but these won't have any influence over the print.