Liczymy pasujące modele…
This is an OralB electric toothbrush head protector/case for when travelling, it can stop dirt and other items from touching the head of your toothbrush. Includes air vents to prevent moisture build up inside the case. How to use - place…
This is a model I uploaded and strengthened the arms that are too thin at the bottom connection by raising the connecting bar and adding 2mm to the bottoms of the arms making them stronger and last longer. 15% infill Printed on Bambulab…
The original wall anchor piece only lets the screw to hold/squeeze the bottom half of the part wall anchor printed part against the wall which means it's if you pull on the base plates, it can break there, leavinf the top half on top of…
Print like the original model: 0.2mm layer height 50% infill 2 shells print in place
This model takes the sckeylog's fixed version of ShadowBons's Pikachu model and gives the tail another attachment point to the main body. This should make the tail much more resistant to breakage without changing the look much. Print…
added more material between badge holder and rsa token holder for better structural integrity 11/09/22: this one should be the right size Category: Office
Thank you to lukes3d for the nice design for a simple paper towel holder. The files I modified are from the original version (https://www.thingiverse.com/thing:5256806) for reference, which works fine other than the high stress area where…
I really enjoy using the X-Handles, but as is frequently reported in the original design's comments, many people experience cracking in the sharp corner where handle mounts to the extrusion. I too experienced this problem on both of my…
Strengthened with Combining parts
After using another steam controller battery cover with external dongle and having multiple breaks, I looked at where I could add material and make other changes to make the injection-mold optimized original CAD file more suitable for…
Remix of iPad Halter für Ikea Skadis by DanGeb with added strength (extra support pegs). Added extra pegs for safety reasons as I want to spread out the weight material stress to reduce risk of pegs breaking. My iPad Air M2 2024 fits…
This is a mild remix of the awesome multi-material version of the classic marlin by Cipis . I found that on that version, the colors go all the way through the fish, so that the adhesion between the color sections is similar to…
This is a bracket that mounts on any standard 3030 T-slot rail, with a T-nut and a M5 bolt in the back. You can attach a common Arca-Swiss adapter plate to the front using a ¼-20 socket head screw with a washer. I designed this because I…
Thanks to bkerler for including the CAD model! This made remixing so much easier. At first, I tried using FreeCad for the remix, but lacking experience I opted to export the FCSTD model to STEP, then importing that to Fusion360. Printed…
RØDE NT-USB Mount replacement. This part often takes the brunt of accidental knocks, and is extremely prone to snapping on the prong the screw goes through. This part has twice as many prongs as the stock one and therefore it must be…
Stronger remix of https://www.thingiverse.com/thing:5023863 Category: Gadgets
I was having trouble removing the supports off the bottom of the previous two models (original and then the strengthened) without breaking the “feet” off the bottom. Beefed ‘em up, and now they’re solid. Use either m3 x 10 or m3 x 12…
I took the existing v2 design by Bronan (which he borrowed from DennisP's MagSafe car mount) and made the shaft larger to withstand more abuse (as this car is a CarNextDoor / Uber Carshare loan vehicle). I printed flat on its base,…
Print as per 3MF with supports enabled for the four corners where the screw holes are.
Wahl Shaver lever based on @chrisxbarb model but had to make a thicker connection between the lever and the base because it immediately broke. I printed this with PLA and it's working well for me.
I kept getting filament runouts on a non-MMU2 print... then I noticed the stock IR filament sensor tower (for the MMU2s) had split out the side that was thin. That side was only one perimeter thick, all the way to the edge, and split…
This is a quick remix of a terminal cover set for most 280-310Ah LiFePO4 Prismatic Cells. The original files for the busbars were well designed but unfortunately quite weak and so would consistently split apart when I tried to snap them…
I decided to make a remix of this model because the leash assembly place was too weak. I also removed those little tabs for the ID to came in whole.
No matter what I do, the tip always breaks off. This should strengthen the tip, without altering the appeared too much.
A slightly modified version of NathanMichaelMoore's gimbal protector to strengthen the part
My Bolts are MUCH stronger and use 30g less filament than the originals (mainly due to me using 12mm heads instead of 25mm ones) The XL phone holder fits my S24 Ultra with a case perfectly. I printed the phone holder in PETG and the…
I remixed the original models for my own taste. Strengthened wire / cable channels with less openings. 4 types are included.
Strengthened version SHR3D.eu's peace pendant. I printed the original made by SHR3D.ed however the small connection from the lanyard hole to the pendant broke so I beefed it up a bit. Everything else about the pendant is the same and…
The name on the top is just a gimmick, which I added to my print. It is not part of this model. First, I printed the letters in a separate print job with only one layer in height. Then in a second print job, I printed the frisbee directly…
Remix of a replacement fork for Bruder telescopic loaders (should fit CAT and JLG 2505 ones).
I really like the simple and space saving style of mounting nerf guns from the picatinny rail, but original was too weak and heavier guns (or a less than careful child) would break the mount. I've made it wider and longer to hopefully…
Remix of the original K1/K1C top mount for the Creality Space Pi X4 / CFS. Original design features: Fits on top of the K1/K1C/K1SE frame with no screws or additional mounting hardware required Compatible in both directions on K1/K1C/K1SE…
I printed the first one in PET-G then tore it apart with my hands. This is a result of my tweaks in Prusa Slicer.
On my Vcore3 500 the cable support on my eva3 hotend broke after only a couple dozen hours. It is a weak design because it has to make room for the 4028 fan or the dual 5015 fans that run perpendicular to the back plate in the stock EVA3…
I've added a lot of strength to both the top and side tube mounts - I found this setup to be the simplest to print and set up. Mine is placed on the left side of the printer just mirror the side piece in your slicer for a right hand side…
Print is the same as the original @kripso's model: Filament: PLA (best choice: easy, fast and no fails) or PETG (not necessary IMO) layer height: 0.2mm - fast, strenght, good easthetic. Infill: 15-20% Perimeters: 4 Supports: No Brim: No…
I just picked the STL and made it from scratch as similar as I could. I made it because I liked the design but wanted to add holes for M3 heated inserts, so it is easier to remove the fans without using nuts. Print it in the position…
This is a replacement bracket for the Y axis pulley on the Wanhao Duplicator i3 and clones. The stock bracket can flex during print, as well as bend over time, creating wavy lines on the print surface and added noise. This design is based…
The standard equipment on the Tevo Tarantula leaves quite a bit to be desired. I noticed that the stock x-axis motor mount was flexing when I would tension the belt, so I decided to create a more sturdy mount for that motor. I have seen a…
Fishing Pole Clips- remixed from MacGyver on Thingiverse
SpeedyBee Master 5 V2 Side Panels – Strengthened with USB Port Air holes on the front side plate removed to increase strength. Straight USB access on the right side for the SpeedyBee F405 V4. Hexagonal compensation holes added on the side…
Stronger version of @lochej_2068433 adapter. You need to mirror in X axis for the other side.
Made it out of PETG for long lasting, 4 perimeters 20% infill, with little support.
Freat design, but for me at least, the rails needed to be widened, cheers for the design 0.4 nozzle 0.4 width 0.2 layer height 20% infill Generic pla
Nest wifi pro wall mount
I have updated the default Cakewalk mount to strengthen a couple weak points in the original. The stepper motor mount is now thicker and the mount plate is now thicker as well and the connection point where the column meets the mount…
Found the original would flex slightly left and right out of ABS/ASA. So reinforced it.
Sturdier version that doesnt bend so easily and slip off, handles the weight of a pair of jeans. Printed with AddNorth PETG Black, 30% infill. Shelf height: 19mm.
This thing was made with Tinkercad. Edit it online https://v1.tinkercad.com/things/bmbDEjf3Zhg Strengthened the back of the hand to avoid cracking across the palm above the server mount Added internal structure to act as a guide for steel…
see as well: https://www.thingiverse.com/thing:7099082 Print Settings Rafts: No Supports: No Resolution: 0.14 - 0.28 Infill: 45% Filament material: ABS (ASA should work as well, PLA might get too warm, it's quite near the heatblock…)…
Pixelated 20739 Bumper Bracket (Strengthened) V3
This is strengthened fuel lock gear for Volvo V70 II and probably other Volvo cars on platform P2. The original dimensions would just not hold. So I remixed it and made the weak point, which is the worm gear stronger and made the…
I increased the part strength and gripping surface area. Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 75
As I have 4x Q5 printers, I have found when I need to work on the effector, separating the cage, plate and hotend can be time consuming. I opened the STEP file in FreeCAD, removed the original wiring hole and added a new larger hole at…
This is a Remix of the awesome First and foremost: thanks waveman for this awesome model. It brings joy not only to my children but many of our little guests at home! I only remixed one part which you can download in its improved version…
The outer wall was very thin and taking all the stress from the motor so I thickened the wall right up but left plenty of clearance for the motor and did not affect the dimensions for the fit. Category: R/C Vehicles
I recommend printing out of PETG for more strength. Carabiner not included but they are very easy to find on printables. This is only a remix of the large croc holder! 25% honeycomb infill.
Stage 2 lets the toolhead rotate about the x axis causing lots of ghosting and a lack luster input shaper result, meaning we cant print above ~5k acceleration. With these upgrades I am manageable to print at 10-15k acceleration, even when…
The original tower connection has been preserved so it remains compatible with the existing tower modules. The mounting rim has been extended outward by approximately ¼ inch and slightly thickened to distribute the tower’s weight across a…
see as well: https://www.thingiverse.com/thing:7099082 Print Settings Rafts: No Supports: No Resolution: 0.14 - 0.28 Infill: 45% Filament material: ABS (ASA should work as well, PLA might get too warm, it's quite near the heatblock…)…
The original wall anchor piece only lets the screw to hold/squeeze the bottom half of the part wall anchor printed part against the wall which means it's if you pull on the base plates, it can break there, leavinf the top half on top of…
This model is a female part to a sliding lock piece. it is stronger and more reinforced than the metal ones. works well if it breaks. best to be printed in PETG and requires thin layer heights for the strongest and best results.
I originally used Logan's horseshoe mod until the spool guides broke in the middle of a print. Tried elcrni's mod, but ended up customizing that to fit my Trident 300^3, but that had some issues with leaning the spool and catching the…
Remix to add material to sit flat against the side of the printer and two ribs to reduce flex. Print in the orientation of the second picture, no supports required. Printed with 40% infill although less may be fine with the changes made.
