Hand v3 with finger joints and hand strengthened
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This thing was made with Tinkercad. Edit it online https://v1.tinkercad.com/things/bmbDEjf3ZhgStrengthened the back of…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This thing was made with Tinkercad. Edit it online https://v1.tinkercad.com/things/bmbDEjf3Zhg
Strengthened the back of the hand to avoid cracking across the palm above the server mount Added internal structure to act as a guide for steel cable Added a mount for arm\wrist Added joints all fingers after a while the fingers started to crack each time the fingers are flexed Finger tips made slightly bigger so I can hide the crimped ends Basic servo code for testing each finger\thumb at a time, then it will execute all servos with no delay
Using ABS
Category: 3D Printing
