1 / 2
HVAC Floor Register Curtain Holdback
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Keeps a floor-length curtain clear of a floor register. Supports an opening up to 12" x 2.25".
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 71
- Makes
- 0
- Views
- 583
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
A curtain holdback hood for a floor-installed register. The register drops into the hood.
Register dimensions supported:
Above floor: 13.5" x 3.75"
Duct opening: 12" x 2.25"
Two options available… single piece for large print volumes. Two-piece for smaller volumes (e.g. MK3s).
Goals:
- Keep curtains from covering the register
- Rigid enough to withstand constant abuse from robot vacuum
Print settings:
- PLA yields a clean print (two-piece)
- 3 perimeters (0.4mm nozzle)