GKR Baseplates
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Baseplates for the game GKR (Giant Killer Robots).
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 39
- Makes
- 0
- Views
- 439
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution
Baseplates for the game GKR (Giant Killer Robots).
These allow the health of a unit to be displayed on their baseplates rather than unit cards, making it more visible to other players at a glance.
Print instructions
Category: Toys & Games Summary
Baseplates for the game GKR (Giant Killer Robots).
These allow the health of a unit to be displayed on their baseplates rather than unit cards, making it more visible to other players at a glance.
Print Settings
Rafts: No
Supports: No
Infill: 100%
Notes:
Infill can be low but will use basically the same amount of filament but 100% should give the best surface finish
Post-Printing
Unit Bases
To print a HP base for all support units and mercs you will require these quantities:
5 x 1HP base
6 x 2HP base
5 x 3HP base
(You can decide whether or not it is worth having bases for units with 1HP or not as you could just remember that any units without a base have 1HP)
If you have Big Little Buddy you will also require:
1 x BLB
Pegs/HP Markers
If every single unit is in play at the same time (unlikely) you will require:
37 x Pegs
Inserting
The tolerances on these are designed so they fit TIGHT.
To attach base you will need to click in each point of the base one at a time:
1: place rear edge of unit against inner edge that has HP peg holes
2: while slightly flexing the printed base down work your way clockwise by pushing the corners of the unit into the base
3: pegs should push into the holes firmly but may require pushing in and out a few times for goldilocks fit